ZONCN T9000 Inverter VFD 220v Three Phase Input Variable Frequency Inverter
ZONCN Inverter Introduction
ZONCN NZ100 Inverter--VF control mini size inverter
ZONCN NZ200 Inverter--Economical vector control inverter
ZONCN Z2000 Inverter-For general purpose industrial application, support EtherCAT communication
ZONCN T9000 Inverter- For general purpose industrial application, support Profinet communication
ZONCN Z8000 Inverter--High performance inverter, open and close loop vector control, support Profibus communication
ZONCN T9000 Inverter Model
| ZONCN T9000 Inverter Model | Input Voltage (V) | Rated output power(kW) | Rated input current(A) | Rated output current(A) | Motor Power (KW) |
| T9200-0R4G | 1PH AC 220V±15% | 0.4 | 5.4 | 2.5 | 0.4 |
| T9200-0R75G | 0.75 | 7.2 | 5 | 0.75 |
| T9200-1R5G | 1.5 | 10 | 7 | 1.5 |
| T9200-2R2G | 2.2 | 16 | 11 | 2.2 |
| T9200-3R7G | 3.7 | 17 | 16.5 | 3.7 |
| T9200-5R5G | 5.5 | 26 | 25 | 5.5 |
| T9200-7R5G | 7.5 | 35 | 32 | 7.5 |
| T9400-0R4G | 3PH AC 380V±15% | 0.4 | 3.4 | 1.2 | 0.4 |
| T9400-0R75G | 0.75 | 3.8 | 2.5 | 0.75 |
| T9400-1R5G | 1.5 | 5 | 3.7 | 1.5 |
| T9400-2R2G | 2.2 | 5.8 | 5 | 2.2 |
| T9400-3R7G/5R5P | 3.7/5.5 | 10/15 | 9/13 | 3.7/5.5 |
| T9400-5R5G/7R5P | 5.5/7.5 | 15/20 | 13/17 | 5.5/7.5 |
| T9400-7R5G/11P | 7.5/11 | 20/26 | 17/25 | 7.5/11 |
| T9400-11G/15P | 11/15 | 26/35 | 25/32 | 11/15 |
| T9400-15G/18.5P | 15/18.5 | 35/38 | 32/37 | 15/18.5 |
| T9400-18.5G/22P | 18.5/22 | 38/46 | 37/45 | 18.5/22 |
| T9400-22G/30P | 22/30 | 46/62 | 45/60 | 22/30 |
| T9400-30G/37P | 30/37 | 62/76 | 60/75 | 30/37 |
| T9400-37G/45P | 37/45 | 76/90 | 75/90 | 37/45 |
| T9400-45G/55P | 45/55 | 92/113 | 90/110 | 45/55 |
| T9400-55G | 55 | 113 | 110 | 55 |
| T9400-75G/90P | 75/90 | 157/180 | 150/176 | 75/90 |
| T9400-90G/110P | 90/110 | 180/214 | 176/210 | 90/110 |
| T9400-110G/132P | 110/132 | 214/256 | 210/253 | 110/132 |
★Please contact us directly for inverter powers above 110kw
|
Nameplate Description
Inverter Specification
| Item | Description |
| Basic function | Control Mode | VF control |
| Sensorless flux vector control(SVC) |
| Close-loop vector control(FVC)(Above 3.7kW) |
| Maximum frequency | 0~600Hz |
| Carrier frequency | 0.5kHZ——8kHz |
| The carrier frequency is automatically adjusted based on the load features |
| Input frequency resolution | Digital setting:0.01Hz |
| Analog setting: Maximum frequency x 0.025% |
| Start torque | G Type:0.5Hz/150%(SVC) |
| P Type:0.5Hz/100% |
| Speed range | 1:100 (SVC) |
| Speed stability accuracy | ±0.5%(SVC) |
| Overload capacity | G Type:60s for 150% of the rated current, 3s for 180% of the rated current. P Type:60s for 120% of the rated current, 3s for 150% of the rated current. |
| Torque boost | Auto-boost ; |
| Customized boost: 0.1%~30.0% |
| V/F Curve | Straight-line V/F curve |
| Multi-point V/F curve |
| N-power V/F curve (1.2-power, 1.4-power, 1.6-power, 1.8-power, square) |
| V/F separation | 2 types: complete separation; half separation |
| Ramp Mode | Straight-line ramp. |
| Four groups of acceleration/deceleration time with the range of 0.00`6500.0s |
| DC braking | DC braking frequency:0.00Hz~Maximum frequency |
| Braking time:0.0s~36.0s |
| Braking action current value:0.0%~100.0% |
| JOG control | JOG frequency range:0.00Hz~50.00Hz |
| JOG acceleration/deceleration time: 0.0s~6500.0s. |
| Simple PLC,Multiple preset speeds | It implements up to 16 speeds via the simple PLC function or combination of terminal states |
| Onboard PID | It realizes process-controlled closed loop control system easily |
| Auto voltage regulation(AVR) | It can keep constant output voltage automatically when the mains voltage |
| Overvoltage/overcurrent stall control | The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to over voltage/over current |
| Rapid current limit | It helps to avoid frequent over current faults of the AC drive. |
| Torque limit and control | It can limit the torque automatically and prevent frequent over current tripping during the running process. Torque control can be |
| implemented in the FVC mode. |
| | Support for multiple PG card | Support for differential input PG card, resolver PG card ,rotating transformer PG card |
FAQ
Q1: T9000 series inverter can be used for most of industrial solutions?
A: Yes, T9000 inverter is ZONCN's general purpose series, powers range from 0.4kw to 450kw. Except the standard RS485 communication, it also supports Profinet communication, it has 24V terminal, analog input, etc.
Q2. What is your inverters warranty?
A: All our inverters have 18 months of warranty time.
Q3. Can you produce for my own logo?
A, Yes, no problem, we can print your logon on our VFD inverter drive if your quantity can meet the customization requirements.
Product Tags:
|
|
ZONCN T9000 Inverter VFD 220v Three Phase Input Variable Frequency Inverter Images
|
